网站地图
热搜关键词:CE认证青岛CE认证机械CE认证山东CE认证欧盟Emark认证欧盟CE认证ROHS 检测美国FCC认证
www.williamhill898.com
当前位置:英国威廉希尔公司网址 > www.williamhill898.com > 行业资讯 > 97/23/EC压力设备指令协调标准

www.williamhill898.com

97/23/EC压力设备指令协调标准
英国威廉希尔公司网址   发布时间:2014/10/11

 出于安全考虑,欧盟对于承压设备的设计,制造等都有相应的法规要求。进入欧盟市场流通的承压设备必须取得CE认证标记。欧盟承压设备指令(97/23/EC),对承压设备的设计,制造和符合性评估提出了统一的认证方案,代替欧盟成员各国各自的法规制度,允许承压设备进入欧盟所有成员国。

欧盟承压设备指令(PED)适用于各类承压设备制造企业,产品覆盖所有最大允许工作压力大于0.5bar的锅炉,压力容器,压力管道,压力附件以及安全附件。
(欧盟“调和标准”是指由CEN、CENELEC和ETSI根据欧盟委员会与各成员国商议后发布的命令制定并批准实施的欧洲标准。根据欧洲标准化组织的规定,各成员国必须将协调标准转换成国家标准,并撤销有悖于协调标准的国家标准,这一规定是强制性的。协调标准的标题和代号必须在欧共体官方公报上发布,并指明与其相对应的新方法指令。制造商的产品只要符合由官方公报公布、且已被转化为国家标准的协调标准,即可推定该产品符合相应的欧盟指令的基本要求。执行协调标准是一种自愿性行为,制造商可以自由选择采用任何其他技术方法来确保符合基本要求。)
The summary list hereunder is a compilation of the references of harmonised standards which have been generated by the HAS (Harmonised standards) database. This IT application HAS automates the process of the publication of the references of harmonised standards in the Official Journal of the European Union.
Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal gives legal affect.
 
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
 
ESO (1)
Reference and title of the harmonised standard
(and reference document)
Reference of superseded standard
Date of cessation of presumption of conformity of superseded standard
Note 1
CEN
EN 3-8:2006
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
 
 
EN 3-8:2006/AC:2007
 
 
CEN
EN 19:2002
Industrial valves - Marking of metallic valves
 
 
CEN
EN 267:2009+A1:2011
Automatic forced draught burners for liquid fuels
EN 267:2009

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 287-1:2011
Qualification test of welders - Fusion welding - Part 1: Steels
EN 287-1:2004

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 334:2005+A1:2009
Gas pressure regulators for inlet pressures up to 100 bar
EN 334:2005

Note 2.1
Date expired
(31/07/2009) 
CEN
EN 378-2:2008+A2:2012
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 378-2:2008+A1:2009

Note 2.1
Date expired
(30/11/2012) 
CEN
EN 593:2009+A1:2011
Industrial valves - Metallic butterfly valves
EN 593:2009

Note 2.1
Date expired
(30/09/2011) 
CEN
EN 676:2003+A2:2008
Automatic forced draught burners for gaseous fuels
 
 
EN 676:2003+A2:2008/AC:2008
 
 
CEN
EN 764-5:2002
Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials
 
 
CEN
EN 764-7:2002
Pressure equipment - Part 7: Safety systems for unfired pressure equipment
 
 
EN 764-7:2002/AC:2006
 
 
CEN
EN 1057:2006+A1:2010
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1057:2006

Note 2.1
Date expired
(31/08/2010) 
CEN
EN 1092-1:2007
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
 
 
CEN
EN 1092-3:2003
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
 
 
EN 1092-3:2003/AC:2007
 
 
CEN
EN 1092-4:2002
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
 
 
CEN
EN 1171:2002
Industrial valves - Cast iron gate valves
 
 
CEN
EN 1252-1:1998
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
 
 
EN 1252-1:1998/AC:1998
 
 
CEN
EN 1252-2:2001
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C
 
 
CEN
EN 1349:2009
Industrial process control valves
EN 1349:2000

Note 2.1
Date expired
(31/05/2010) 
CEN
EN 1515-4:2009
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
 
 
CEN
EN 1562:2012
Founding - Malleable cast irons
EN 1562:1997

Note 2.1
Date expired
(30/09/2012) 
CEN
EN 1563:2011
Founding - Spheroidal graphite cast irons
EN 1563:1997

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 1564:2011
Founding - Ausferritic spheroidal graphite cast irons
EN 1564:1997

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 1591-1:2001+A1:2009
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
EN 1591-1:2001

Note 2.1
Date expired
(30/09/2009) 
EN 1591-1:2001+A1:2009/AC:2011
 
 
CEN
EN 1626:2008
Cryogenic vessels - Valves for cryogenic service
EN 1626:1999

Note 2.1
Date expired
(31/05/2009) 
CEN
EN 1653:1997
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
 
 
EN 1653:1997/A1:2000
Date expired
(28/02/2001) 
CEN
EN 1759-3:2003
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
 
 
EN 1759-3:2003/AC:2004
 
 
CEN
EN 1759-4:2003
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
 
 
CEN
EN 1797:2001
Cryogenic vessels - Gas/material compatibility
EN 1797-1:1998

Note 2.1
Date expired
(31/01/2002) 
CEN
EN 1866:2005
Mobile fire extinguishers
 
 
CEN
EN 1983:2006
Industrial valves - Steel ball valves
 
 
CEN
EN 1984:2010
Industrial valves - Steel gate valves
EN 1984:2000

Note 2.1
Date expired
(03/08/2012) 
CEN
EN ISO 4126-1:2004
Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004)
 
 
EN ISO 4126-1:2004/AC:2006
 
 
CEN
EN ISO 4126-3:2006
Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
 
 
CEN
EN ISO 4126-4:2004
Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004)
 
 
CEN
EN ISO 4126-5:2004
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004)
 
 
EN ISO 4126-5:2004/AC:2008
 
 
CEN
EN ISO 9606-2:2004
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
 
 
CEN
EN ISO 9606-3:1999
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
 
 
CEN
EN ISO 9606-4:1999
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
 
 
CEN
EN ISO 9606-5:2000
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
 
 
CEN
EN ISO 9712:2012
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN 473:2008

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 10028-1:2007+A1:2009
Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10028-1:2007

Note 2.1
Date expired
(31/10/2009) 
EN 10028-1:2007+A1:2009/AC:2009
 
 
CEN
EN 10028-2:2009
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-2:2003

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 10028-3:2009
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10028-3:2003

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 10028-4:2009
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-4:2003

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 10028-5:2009
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-5:2003

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 10028-6:2009
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-6:2003

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 10028-7:2007
Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10028-7:2000

Note 2.1
Date expired
(30/06/2008) 
CEN
EN 10204:2004
Metallic products - Types of inspection documents
 
 
CEN
EN 10213:2007
Steel castings for pressure purposes
EN 10213-3:1995
EN 10213-4:1995
EN 10213-2:1995
EN 10213-1:1995


Note 2.1
Date expired
(31/05/2008) 
EN 10213:2007/AC:2008
 
 
CEN
EN 10216-1:2002
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
 
 
EN 10216-1:2002/A1:2004
Date expired
(30/09/2004) 
CEN
EN 10216-2:2002+A2:2007
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-2:2002

Note 2.1
Date expired
(29/02/2008) 
CEN
EN 10216-3:2002
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
 
 
EN 10216-3:2002/A1:2004
Date expired
(30/09/2004) 
CEN
EN 10216-4:2002
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
 
 
EN 10216-4:2002/A1:2004
Date expired
(30/09/2004) 
CEN
EN 10216-5:2004
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
 
 
EN 10216-5:2004/AC:2008
 
 
CEN
EN 10217-1:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
 
 
EN 10217-1:2002/A1:2005
Date expired
(31/07/2005) 
CEN
EN 10217-2:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
 
 
EN 10217-2:2002/A1:2005
Date expired
(31/07/2005) 
CEN
EN 10217-3:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
 
 
EN 10217-3:2002/A1:2005
Date expired
(31/07/2005) 
CEN
EN 10217-4:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
 
 
EN 10217-4:2002/A1:2005
Date expired
(31/07/2005) 
CEN
EN 10217-5:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
 
 
EN 10217-5:2002/A1:2005
Date expired
(31/07/2005) 
CEN
EN 10217-6:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
 
 
EN 10217-6:2002/A1:2005
Date expired
(31/07/2005) 
CEN
EN 10217-7:2005
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
 
 
CEN
EN 10222-1:1998
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
 
 
EN 10222-1:1998/A1:2002
Date expired
(31/10/2002) 
CEN
EN 10222-2:1999
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties
 
 
EN 10222-2:1999/AC:2000
 
 
CEN
EN 10222-3:1998
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
 
 
CEN
EN 10222-4:1998
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
 
 
EN 10222-4:1998/A1:2001
Date expired
(31/01/2002) 
CEN
EN 10222-5:1999
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
 
 
EN 10222-5:1999/AC:2000
 
 
CEN
EN 10253-2:2007
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
 
 
CEN
EN 10253-4:2008
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
 
 
EN 10253-4:2008/AC:2009
 
 
CEN
EN 10269:1999
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
 
 
EN 10269:1999/A1:2006
Date expired
(31/10/2006) 
EN 10269:1999/A1:2006/AC:2008
 
 
CEN
EN 10272:2007
Stainless steel bars for pressure purposes
EN 10272:2000

Note 2.1
Date expired
(30/04/2008) 
CEN
EN 10273:2007
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10273:2000

Note 2.1
Date expired
(30/06/2008) 
CEN
EN 10305-4:2011
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-4:2003

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 10305-6:2005
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
 
 
CEN
EN ISO 10931:2005
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005)
 
 
CEN
EN 12178:2003
Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
 
 
CEN
EN 12263:1998
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
 
 
CEN
EN 12266-1:2012
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
EN 12266-1:2003

Note 2.1
Date expired
(31/10/2012) 
CEN
EN 12284:2003
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
 
 
CEN
EN 12288:2010
Industrial valves - Copper alloy gate valves
EN 12288:2003

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12334:2001
Industrial valves - Cast iron check valves
 
 
EN 12334:2001/A1:2004
Date expired
(28/02/2005) 
EN 12334:2001/AC:2002
 
 
CEN
EN 12392:2000
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
 
 
CEN
EN 12420:1999
Copper and copper alloys - Forgings
 
 
CEN
EN 12434:2000
Cryogenic vessels - Cryogenic flexible hoses
 
 
EN 12434:2000/AC:2001
 
 
CEN
EN 12451:2012
Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 12451:1999

Note 2.1
Date expired
(30/11/2012) 
CEN
EN 12452:2012
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
EN 12452:1999

Note 2.1
Date expired
(30/11/2012) 
CEN
EN 12516-1:2005
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
 
 
EN 12516-1:2005/AC:2007
 
 
CEN
EN 12516-2:2004
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
 
 
CEN
EN 12516-3:2002
Valves - Shell design strength - Part 3: Experimental method
 
 
EN 12516-3:2002/AC:2003
 
 
CEN
EN 12516-4:2008
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
 
 
CEN
EN 12542:2010
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
EN 12542:2002
EN 14075:2002


Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12735-1:2010
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
EN 12735-1:2001

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12735-2:2010
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
EN 12735-2:2001

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12778:2002
Cookware - Pressure cookers for domestic use
 
 
EN 12778:2002/A1:2005
Date expired
(31/12/2005) 
EN 12778:2002/AC:2003
 
 
CEN
EN 12952-1:2001
Water-tube boilers and auxiliary installations - Part 1: General
 
 
CEN
EN 12952-2:2011
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 12952-2:2001

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12952-3:2011
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
EN 12952-3:2001

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12952-5:2011
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 12952-5:2001

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12952-6:2011
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
EN 12952-6:2002

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 12952-7:2012 (new)
Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 12952-7:2002

Note 2.1
30/04/2013 
CEN
EN 12952-8:2002
Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
 
 
CEN
EN 12952-9:2002
Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
 
 
CEN
EN 12952-10:2002
Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure
 
 
CEN
EN 12952-11:2007
Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
 
 
CEN
EN 12952-14:2004
Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution
 
 
CEN
EN 12952-16:2002
Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
 
 
CEN
EN 12952-18:2012 (new)
Water-tube boilers and auxiliary installations - Part 18: Operating instructions
 
 
CEN
EN 12953-1:2012
Shell boilers - Part 1: General
EN 12953-1:2002

Note 2.1
Date expired
(30/09/2012) 
CEN
EN 12953-2:2012
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN 12953-2:2002

Note 2.1
Date expired
(30/09/2012) 
CEN
EN 12953-3:2002
Shell boilers - Part 3: Design and calculation for pressure parts
 
 
CEN
EN 12953-4:2002
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler
 
 
CEN
EN 12953-5:2002
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
 
 
CEN
EN 12953-6:2011
Shell Boilers - Part 6: Requirements for equipment for the boiler
EN 12953-6:2002

Note 2.1
Date expired
(09/09/2011) 
CEN
EN 12953-7:2002
Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
 
 
CEN
EN 12953-8:2001
Shell boilers - Part 8: Requirements for safeguards against excessive pressure
 
 
EN 12953-8:2001/AC:2002
 
 
CEN
EN 12953-9:2007
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
 
 
CEN
EN 12953-12:2003
Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
 
 
CEN
EN 12953-13:2012
Shell boilers - Part 13: Operating instructions
 
 
CEN
EN 13121-1:2003
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
 
 
CEN
EN 13121-2:2003
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
 
 
CEN
EN 13121-3:2008+A1:2010
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 13121-3:2008

Note 2.1
Date expired
(31/08/2010) 
EN 13121-3:2008+A1:2010/AC:2011
 
 
CEN
EN 13134:2000
Brazing - Procedure approval
 
 
CEN
EN 13136:2001
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
 
 
EN 13136:2001/A1:2005
Date expired
(31/12/2005) 
CEN
EN 13175:2003+A2:2007
LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
EN 13175:2003

Note 2.1
Date expired
(30/09/2007) 
CEN
EN 13348:2008
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 13348:2001

Note 2.1
Date expired
(28/02/2009) 
CEN
EN 13371:2001
Cryogenic vessels - Couplings for cryogenic service
 
 
CEN
EN 13397:2001
Industrial valves - Diaphragm valves made of metallic materials
 
 
CEN
EN 13445-1:2009
Unfired pressure vessels - Part 1: General
EN 13445-1:2002

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 13445-2:2009
Unfired pressure vessels - Part 2: Materials
EN 13445-2:2002

Note 2.1
Date expired
(31/12/2009) 
EN 13445-2:2009/A1:2012
Date expired
(31/12/2012) 
EN 13445-2:2009/A2:2012
Date expired
(31/12/2012) 
CEN
EN 13445-3:2009
Unfired pressure vessels - Part 3: Design
EN 13445-3:2002

Note 2.1
Date expired
(31/12/2009) 
EN 13445-3:2009/A1:2012
Date expired
(31/12/2012) 
CEN
EN 13445-4:2009
Unfired pressure vessels - Part 4: Fabrication
EN 13445-4:2002

Note 2.1
Date expired
(31/12/2009) 
EN 13445-4:2009/A1:2011
Date expired
(03/08/2012) 
CEN
EN 13445-5:2009
Unfired pressure vessels - Part 5: Inspection and testing
EN 13445-5:2002

Note 2.1
Date expired
(31/12/2009) 
EN 13445-5:2009/A2:2011
Date expired
(03/08/2012) 
EN 13445-5:2009/A3:2011
Date expired
(03/08/2012) 
EN 13445-5:2009/A1:2011
Date expired
(03/08/2012) 
CEN
EN 13445-6:2009
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
EN 13445-6:2002

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 13445-8:2009
Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13445-8:2006

Note 2.1
Date expired
(31/12/2009) 
CEN
EN 13458-1:2002
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
 
 
CEN
EN 13458-2:2002
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
 
 
EN 13458-2:2002/AC:2006
 
 
CEN
EN 13458-3:2003
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements
 
 
EN 13458-3:2003/A1:2005
Date expired
(31/12/2005) 
CEN
EN 13480-1:2012
Metallic industrial piping - Part 1: General
EN 13480-1:2002

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13480-2:2012
Metallic industrial piping - Part 2: Materials
EN 13480-2:2002

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13480-3:2012
Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2002

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13480-4:2012
Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-4:2002

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13480-5:2012
Metallic industrial piping - Part 5: Inspection and testing
EN 13480-5:2002

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13480-6:2012
Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-6:2004

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13480-8:2012
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 13480-8:2007

Note 2.1
Date expired
(31/12/2012) 
CEN
EN ISO 13585:2012
Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)
EN 13133:2000

Note 2.1
Date expired
(31/12/2012) 
CEN
EN 13611:2007+A2:2011
Safety and control devices for gas burners and gas burning appliances - General requirements
EN 13611:2007

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 13648-1:2008
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN 13648-1:2002

Note 2.1
Date expired
(31/05/2009) 
CEN
EN 13648-2:2002
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service
 
 
CEN
EN 13648-3:2002
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
 
 
CEN
EN 13709:2010
Industrial valves - Steel globe and globe stop and check valves
EN 13709:2002

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 13789:2010
Industrial valves - Cast iron globe valves
EN 13789:2002

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 13831:2007
Closed expansion vessels with built in diaphragm for installation in water
 
 
CEN
EN 13835:2012
Founding - Austenitic cast irons
EN 13835:2002

Note 2.1
Date expired
(31/07/2012) 
CEN
EN 13923:2005
Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
 
 
CEN
EN 14071:2004
Pressure relief valves for LPG tanks - Ancillary equipment
 
 
CEN
EN 14129:2004
Pressure relief valves for LPG tanks
 
 
CEN
EN 14197-1:2003
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
 
 
CEN
EN 14197-2:2003
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
 
 
EN 14197-2:2003/A1:2006
Date expired
(28/02/2007) 
EN 14197-2:2003/AC:2006
 
 
CEN
EN 14197-3:2004
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
 
 
EN 14197-3:2004/A1:2005
Date expired
(31/12/2005) 
EN 14197-3:2004/AC:2004
 
 
CEN
EN 14222:2003
Stainless steel shell boilers
 
 
CEN
EN 14276-1:2006+A1:2011
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
EN 14276-1:2006

Note 2.1
Date expired
(09/09/2011) 
CEN
EN 14276-2:2007+A1:2011
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
EN 14276-2:2007

Note 2.1
Date expired
(09/09/2011) 
CEN
EN 14341:2006
Industrial valves - Steel check valves
 
 
CEN
EN 14359:2006+A1:2010
Gas-loaded accumulators for fluid power applications
EN 14359:2006

Note 2.1
Date expired
(03/08/2012) 
CEN
EN 14382:2005+A1:2009
Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
EN 14382:2005

Note 2.1
Date expired
(30/09/2009) 
EN 14382:2005+A1:2009/AC:2009
 
 
CEN
EN 14394:2005+A1:2008
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
 
 
CEN
EN 14570:2005
Equipping of LPG tanks, overground and underground
 
 
EN 14570:2005/A1:2006
Date expired
(31/08/2006) 
CEN
EN 14585-1:2006
Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
 
 
CEN
EN 14917:2009+A1:2012
Metal bellows expansion joints for pressure applications
EN 14917:2009

Note 2.1
Date expired
(30/09/2012) 
CEN
EN 15001-1:2009
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
 
 
CEN
EN ISO 15493:2003
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003)
 
 
CEN
EN ISO 15494:2003
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series (ISO 15494:2003)
 
 
CEN
EN ISO 15613:2004
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
 
 
CEN
EN ISO 15614-1:2004
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
 
 
EN ISO 15614-1:2004/A1:2008
Date expired
(31/08/2008) 
EN ISO 15614-1:2004/A2:2012
Date expired
(31/08/2012) 
CEN
EN ISO 15614-2:2005
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
 
 
EN ISO 15614-2:2005/AC:2009
 
 
CEN
EN ISO 15614-4:2005
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)
 
 
EN ISO 15614-4:2005/AC:2007
 
 
CEN
EN ISO 15614-5:2004
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
 
 
CEN
EN ISO 15614-6:2006
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
 
 
CEN
EN ISO 15614-7:2007
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007)
 
 
CEN
EN ISO 15614-8:2002
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
 
 
CEN
EN ISO 15614-11:2002
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
 
 
CEN
EN ISO 15620:2000
Welding - Friction welding of metallic materials (ISO 15620:2000)
 
 
CEN
EN 15776:2011
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
 
 
CEN
EN ISO 16135:2006
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
 
 
CEN
EN ISO 16136:2006
Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
 
 
CEN
EN ISO 16137:2006
Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
 
 
CEN
EN ISO 16138:2006
Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
 
 
CEN
EN ISO 16139:2006
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
 
 
CEN
EN ISO 21787:2006
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
 
 
 
XML 地图 | Sitemap 地图